Author Index

A

  • Abbasloo, Abdollah Investigating the effect of various working fluids in cascade refrigeration cycle integrated with thermal desalination system [Volume 55, Issue 9, 2023, Pages 1063-1088]
  • Abbas Nejad, Ali The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Abedini-Nassab, Roozbeh TI Magnetophoretic Capacitors for Storing Particles and Cells in a Tri-Axial Magnetic Field [Volume 55, Issue 5, 2023, Pages 643-658]
  • Abghary, Mohammad Javad Design and analysis of mechanical behavior of a novel lattice auxetic structure based on rigid rotating mechanism [Volume 55, Issue 2, 2023, Pages 179-192]
  • Abolghasemian, Reza Buckling analysis of tapered laminated composite channel-section beam-columns subjected to combined axial load and end moment [Volume 55, Issue 4, 2023, Pages 515-542]
  • Abolzadeh, Ramin Aerodynamic Design of a Hypersonic Glide Vehicle Based on the Cone-Derived Wave rider Configuration Method [Volume 55, Issue 7, 2023, Pages 797-818]
  • Adabzadeh, Hamid Energy harnessing from water waves by a piezoelectric energy harvester with and without ore-like tip; an experimental study [Volume 55, Issue 10, 2024, Pages 1195-1206]
  • Ahangari Sisi, Zahra Design and Experimental Validation of an Extended State Observer for Estimating of Uncertainties and Unknown Road Input in a Quarter car McPherson Suspension System [Volume 55, Issue 12, 2024, Pages 6-6]
  • Ahmadpour, Aryan Investigation of dust dispersion in urban environment using large eddy simulation method [Volume 55, Issue 11, 2024, Pages 2-2]
  • Ajri, Masoud Modeling and Analysis the Bending Behavior of Soft Pneumatic Network Actuator with Hyperelastic Models [Volume 55, Issue 8, 2023, Pages 1021-1042]
  • Akbari, Ariana Finite Element Simulation and Experimental Evaluation of an Ultrasonic Radiator [Volume 55, Issue 10, 2024, Pages 1261-1274]
  • Akbarzadeh, Pooria The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Alaei, Alireza Coating of AISI 4340 low-alloy steel with austenitic stainless steels and stellite6 cobalt base by tungsten-gas arc welding method and investigation of the microstructure and wear behavior of the resulting layer [Volume 55, Issue 6, 2023, Pages 773-794]
  • Alaie, Mohammad Reze Effect of Electrostatic Field on a Fog Harvester Efficiency with Metal Porous Collector [Volume 55, Issue 1, 2023, Pages 45-60]
  • Alimardan, Amirmasoud Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Amani fard, Nima Numerical investigation of the effect of DBD plasma actuator on performance enhancement of an air-solid particle cyclone separator [Volume 55, Issue 9, 2023, Pages 1135-1156]
  • Amini, Yasser Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder [Volume 55, Issue 7, 2023, Pages 819-836]
  • Amiri, Hossein Economic evaluation of fixed and floating desalination plants on the shores of Makran [Volume 55, Issue 9, 2023, Pages 1045-1062]
  • Amirkhani, Masoud Designing and building a dialogue mechanism suitable for RoboPuppet using deep learning [Volume 55, Issue 8, 2023, Pages 919-942]
  • Asgari, Masood Developing a new functionally graded lattice structure based on an elliptic unit cell for additive manufacturing and investigation of its properties [Volume 55, Issue 4, 2023, Pages 475-494]

B

  • Bagherian Dehaghi, Mahdi Experimental investigation on the geometrical characterization of the cone-jet mode of electrospray of ethanol-water mixtures with different concentrations by high-speed imaging [Volume 55, Issue 5, 2023, Pages 617-642]
  • Bahrami, Hassan Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Bahrami, Sajjad TI Magnetophoretic Capacitors for Storing Particles and Cells in a Tri-Axial Magnetic Field [Volume 55, Issue 5, 2023, Pages 643-658]
  • Bakhtiari HaftLang, Pedram Numerical modeling of rock cutting with abrasive water jet in order to determine the optimal range of parameters affecting the depth and volume of cutting [Volume 55, Issue 8, 2023, Pages 971-994]
  • Barghandan, Mostafa A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Barzegari, Mohammad Mahdi Dynamic Modeling and Parameter Identification of Hydrogen-Oxygen PEM Fuel Cell Model with Integrated Humidifier [Volume 55, Issue 3, 2023, Pages 359-380]
  • Barzegari, Mohammad Mahdi Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Barzegari, Mohammad Mahdi Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells [Volume 55, Issue 8, 2023, Pages 995-1008]
  • Baseri, Hamid Chatter Suppression in turning by applying a tooling mechanism with the ability to change the tool angles [Volume 55, Issue 4, 2023, Pages 461-474]
  • Bazargan, Majid Numerical investigation of the effect of the porous coating layer on the heat transfer plate in the flow of impinging jet array [Volume 55, Issue 3, 2023, Pages 337-358]
  • Behrouz, Hossein Chatter Suppression in turning by applying a tooling mechanism with the ability to change the tool angles [Volume 55, Issue 4, 2023, Pages 461-474]

C

  • Chaibakhsh, Ali Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Chenarani, Hamid Investigation of dust dispersion in urban environment using large eddy simulation method [Volume 55, Issue 11, 2024, Pages 2-2]
  • Cheraghi rizi, Emad Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]

D

  • Dibajian, Seyed Hossein Numerical and experimental analysis of buckling of hemisphere shell made by spinning forming method subjected to uniform external pressure [Volume 55, Issue 6, 2023, Pages 759-772]
  • Dobakhti, Atabak Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string [Volume 55, Issue 6, 2023, Pages 737-758]
  • Doralizadeh, Mohammad Masab Modeling and Nonlinear vibration analysis of Euler-Bernoulli beam under finite deformation [Volume 55, Issue 2, 2023, Pages 193-212]

E

  • Ebrahimi, Fatemeh Analysis of the semi-elliptical crack in the FGM spherical pressure vessels [Volume 55, Issue 6, 2023, Pages 705-722]
  • Emami, Leyla Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells [Volume 55, Issue 8, 2023, Pages 995-1008]
  • Emami Koopaei, Sobhan Effect of Electrostatic Field on a Fog Harvester Efficiency with Metal Porous Collector [Volume 55, Issue 1, 2023, Pages 45-60]
  • Esfahanipour, Akbar Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Eskandarijam, Jafar Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Esmaeili shayan, Mostafa Energy Management Model for a Standalone Hybrid Microgrid Using a Dynamic Decision-Making Algorithm [Volume 55, Issue 1, 2023, Pages 3-20]
  • Esmaeili Shayan, Sahra Energy Management Model for a Standalone Hybrid Microgrid Using a Dynamic Decision-Making Algorithm [Volume 55, Issue 1, 2023, Pages 3-20]
  • Esmalipour, Sina Modeling and Analysis the Bending Behavior of Soft Pneumatic Network Actuator with Hyperelastic Models [Volume 55, Issue 8, 2023, Pages 1021-1042]

F

  • Farzaneh-Gord, Mahmood Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Fooladi Mahani, Majid Optimal cooperative braking strategy design of regenerative and mechanical braking systems for in-wheel drive electric vehicles [Volume 55, Issue 4, 2023, Pages 433-460]
  • Fotouhi, Ali Reza Modeling and Nonlinear vibration analysis of Euler-Bernoulli beam under finite deformation [Volume 55, Issue 2, 2023, Pages 193-212]
  • Fotouhi Qhazvini, Faranak Pollutants Transfer Simulation Model Using Combination of Augmented Reality and Computational Fluid Dynamics Techniques on Cell Phone Platform [Volume 55, Issue 1, 2023, Pages 143-156]

G

  • Gandomkar, Mohamad Numerical and experimental analysis of buckling of hemisphere shell made by spinning forming method subjected to uniform external pressure [Volume 55, Issue 6, 2023, Pages 759-772]
  • Ghadak, Farhad Improving aerodynamic and aeroacoustic performance of the propeller by synchronic wavy tubercles [Volume 55, Issue 9, 2023, Pages 1157-1172]
  • Ghasabzadeh Saryazdi, Maryam Singularity, dynamics and kinetics analysis of a 5-DOF parallel robot using screw theory [Volume 55, Issue 8, 2023, Pages 943-970]
  • Ghasemi, Ahmad Reza Buckling analysis of tapered laminated composite channel-section beam-columns subjected to combined axial load and end moment [Volume 55, Issue 4, 2023, Pages 515-542]
  • Ghasemi, Hassan Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Ghasemi, Jalal Determination of convective heat transfer coefficient in human femur bone drilling in the presence of normal saline and evaluation of effective parameters [Volume 55, Issue 5, 2023, Pages 557-576]
  • Ghatee, Mojtaba Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Ghayour, Mostafa Modeling and Nonlinear vibration analysis of Euler-Bernoulli beam under finite deformation [Volume 55, Issue 2, 2023, Pages 193-212]
  • Ghaznavi, Aidin Experimental Study of Preload and Bolt Arrangement on Composite Joint Performance in Megawatt Wind Turbine's Nacelle Cover and Nose Cone [Volume 55, Issue 7, 2023, Pages 837-856]
  • Ghiyasi Shahraky, Hamidreza The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Ghorbanali, Saeed Investigating of the stability and structural, mechanical and electronic properties of two new superhard conductive carbon structures [Volume 55, Issue 10, 2024, Pages 1207-1218]

H

  • Hadidoolabi, Mostafa Meshless Method for Numerical Solution of Internal Flows with Axial Symmetry [Volume 55, Issue 3, 2023, Pages 285-302]
  • Hajian, Ramin Techno-economic feasibility study of using heat pipe heat exchanger to improve dehumidification in air-handling unit [Volume 55, Issue 3, 2023, Pages 303-336]
  • Hajian, Ramin Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Hamidi, Sabah Numerical analysis of moist-air flow in converging-diverging nozzle with equilibrium and non-equilibrium thermodynamic models [Volume 55, Issue 9, 2023, Pages 1113-1134]
  • Hamzavi Loueh, Mostafa Numerical Study of the Effect of Geometric Parameters on the Performance of Solid-Liquid Ejectors [Volume 55, Issue 1, 2023, Pages 105-122]
  • Hashemabadi, Mahdi Meshless Method for Numerical Solution of Internal Flows with Axial Symmetry [Volume 55, Issue 3, 2023, Pages 285-302]
  • Hashemabadi, Mahdi Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Heidarinejad, Ghassem Numerical Simulation of the Dispersion of Human Sneeze Droplets In The Surrounding [Volume 55, Issue 1, 2023, Pages 85-104]
  • Heidarinejad, Ghassem Numerical simulation of two consecutive human sneezing and examining the dispersion of the resulting droplets in the surroundings [Volume 55, Issue 7, 2023, Pages 875-894]
  • Heidarinejad, Ghassem Numerical study of the spread of toxic and hot fire gases in a multi-storey residential complex with and without sprinkler fire extinguishing system [Volume 55, Issue 11, 2024, Pages 1-1]
  • Hojaji, Mohammad Effect of Electrostatic Field on a Fog Harvester Efficiency with Metal Porous Collector [Volume 55, Issue 1, 2023, Pages 45-60]
  • Hoseini, Sadegh Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Hoshangi, Hasan Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Hossein, Amirhossein Aerodynamic Design of a Hypersonic Glide Vehicle Based on the Cone-Derived Wave rider Configuration Method [Volume 55, Issue 7, 2023, Pages 797-818]
  • Hossein, Amirhossein Improving aerodynamic and aeroacoustic performance of the propeller by synchronic wavy tubercles [Volume 55, Issue 9, 2023, Pages 1157-1172]
  • Hosseini Salari, Ali Optimal cooperative braking strategy design of regenerative and mechanical braking systems for in-wheel drive electric vehicles [Volume 55, Issue 4, 2023, Pages 433-460]

I

  • Irani Rahghi, Mohsen Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Iranmanesh, Mahdi Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Izadifard, Mohammad Hossein Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Izadpanah, Ehsan Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder [Volume 55, Issue 7, 2023, Pages 819-836]

J

  • Jafari Nedoushan, Reza Design and analysis of mechanical behavior of a novel lattice auxetic structure based on rigid rotating mechanism [Volume 55, Issue 2, 2023, Pages 179-192]
  • Jalili Bahabadi, Mohammad Mahdi Simulation and optimization of surface roughness and cutting force in dynamic ploughing process of single crystal copper using molecular dynamics method [Volume 55, Issue 12, 2024, Pages 3-3]
  • Jamali, Ali Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Jamshidi, Reza Meshless Method for Numerical Solution of Internal Flows with Axial Symmetry [Volume 55, Issue 3, 2023, Pages 285-302]
  • Jozvaziri, Mohammad Ali Aerodynamic Design of a Hypersonic Glide Vehicle Based on the Cone-Derived Wave rider Configuration Method [Volume 55, Issue 7, 2023, Pages 797-818]

K

  • Kanooni, Amin Determining the optimal number of collector layers in fog water harvesting system [Volume 55, Issue 11, 2024, Pages 3-3]
  • Karim, Mohammad Hossein Economic evaluation of fixed and floating desalination plants on the shores of Makran [Volume 55, Issue 9, 2023, Pages 1045-1062]
  • Karimi, Amirhossein Numerical investigation of the effect of DBD plasma actuator on performance enhancement of an air-solid particle cyclone separator [Volume 55, Issue 9, 2023, Pages 1135-1156]
  • Kazemi Mazandarani, Sayyed Rafi Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Kermani, Mohammad J. Numerical analysis of moist-air flow in converging-diverging nozzle with equilibrium and non-equilibrium thermodynamic models [Volume 55, Issue 9, 2023, Pages 1113-1134]
  • Keshtkar, Mohammad Mehdi Investigating the effect of various working fluids in cascade refrigeration cycle integrated with thermal desalination system [Volume 55, Issue 9, 2023, Pages 1063-1088]
  • Khademi, Saeed Numerical investigation of the effect of the porous coating layer on the heat transfer plate in the flow of impinging jet array [Volume 55, Issue 3, 2023, Pages 337-358]
  • Khalili, Mohammad Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Khosravi, Saeed Singularity, dynamics and kinetics analysis of a 5-DOF parallel robot using screw theory [Volume 55, Issue 8, 2023, Pages 943-970]
  • Kohan, Mohammad Reza Determining the optimal number of collector layers in fog water harvesting system [Volume 55, Issue 11, 2024, Pages 3-3]
  • Kouhi Gilvan, Hamed Leader Following and Multiple Obstacle Avoidance of Autonomous Vehicle with Steering-Wheel and Driving-Wheel Torques Using Path Planning and Model Predictive Control [Volume 55, Issue 12, 2024, Pages 4-4]
  • Kouhikamali, Ramin Numerical Study of the Effect of Geometric Parameters on the Performance of Solid-Liquid Ejectors [Volume 55, Issue 1, 2023, Pages 105-122]

L

  • Lak, Mojtaba Numerical investigation of the influence of operating conditions on the performance of PEMFC powered Unmanned Aerial Vehicle (UAV): a statistical approach [Volume 55, Issue 3, 2023, Pages 407-430]

M

  • Mahdevari, Satar Numerical modeling of rock cutting with abrasive water jet in order to determine the optimal range of parameters affecting the depth and volume of cutting [Volume 55, Issue 8, 2023, Pages 971-994]
  • Mahmoudimehr, Javad Numerical Simulation of a Biogas-fueled Solid Oxide Fuel Cell and the Investigation of the Influence of Operating Conditions [Volume 55, Issue 7, 2023, Pages 895-916]
  • Mansoori, Shabnam Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Mehdipour, Hadi Three-dimensional micromechanical modelling of effective elastic properties of graphene nanoplatelet-reinforced polymer nanocomposite using a HFGMC-based homogenization approach [Volume 55, Issue 4, 2023, Pages 495-514]
  • Mehrabian, Morteza Numerical Simulation of a Biogas-fueled Solid Oxide Fuel Cell and the Investigation of the Influence of Operating Conditions [Volume 55, Issue 7, 2023, Pages 895-916]
  • Mirzaei, Mehdi Design and Experimental Validation of an Extended State Observer for Estimating of Uncertainties and Unknown Road Input in a Quarter car McPherson Suspension System [Volume 55, Issue 12, 2024, Pages 6-6]
  • Mirzaeinejad, Hossein Optimal cooperative braking strategy design of regenerative and mechanical braking systems for in-wheel drive electric vehicles [Volume 55, Issue 4, 2023, Pages 433-460]
  • Moayedi, Hesam Numerical investigation of the effect of DBD plasma actuator on performance enhancement of an air-solid particle cyclone separator [Volume 55, Issue 9, 2023, Pages 1135-1156]
  • Moayyedi, Mohammad Kazem Pollutants Transfer Simulation Model Using Combination of Augmented Reality and Computational Fluid Dynamics Techniques on Cell Phone Platform [Volume 55, Issue 1, 2023, Pages 143-156]
  • Mobayen, Saleh A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Moghaddas Ahangari, AliAsghar Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Mohammad Alizadeh, behrouz Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string [Volume 55, Issue 6, 2023, Pages 737-758]
  • Mohammadi, Mohammad Mahdi Aeroelastic analysis of a thin composite plate, with the effect of general and local geometric defects [Volume 55, Issue 2, 2023, Pages 235-256]
  • Mohammadi, Mohammad Mostafa Energy harnessing from water waves by a piezoelectric energy harvester with and without ore-like tip; an experimental study [Volume 55, Issue 10, 2024, Pages 1195-1206]
  • MojaveryAgah, Hedyeh Developing a new functionally graded lattice structure based on an elliptic unit cell for additive manufacturing and investigation of its properties [Volume 55, Issue 4, 2023, Pages 475-494]
  • Mokabberi, Abbas A novel objective function for path generation synthesis of the four-bar mechanism with prescribed timing [Volume 55, Issue 12, 2024, Pages 1-1]
  • Mokhtari, Mostafa Investigating the effect of various working fluids in cascade refrigeration cycle integrated with thermal desalination system [Volume 55, Issue 9, 2023, Pages 1063-1088]
  • Mousaavi, S. Abolfazl Experimental Study of Preload and Bolt Arrangement on Composite Joint Performance in Megawatt Wind Turbine's Nacelle Cover and Nose Cone [Volume 55, Issue 7, 2023, Pages 837-856]

N

  • Naderi, Pejman Experimental investigation on the geometrical characterization of the cone-jet mode of electrospray of ethanol-water mixtures with different concentrations by high-speed imaging [Volume 55, Issue 5, 2023, Pages 617-642]
  • Nadery, Alireza Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Najafi, Gholamhassan Energy Management Model for a Standalone Hybrid Microgrid Using a Dynamic Decision-Making Algorithm [Volume 55, Issue 1, 2023, Pages 3-20]
  • Nariman-zadeh, Nader Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Nazari, Mohammadbagher Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Nazari, Mostafa A novel objective function for path generation synthesis of the four-bar mechanism with prescribed timing [Volume 55, Issue 12, 2024, Pages 1-1]
  • Nikbakht, Ali Investigating the effect of thermal cycles on the recovery of tensile strength in self-healing composites under impact loading [Volume 55, Issue 2, 2023, Pages 159-178]
  • Noghabi, Mohammad A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses [Volume 55, Issue 4, 2023, Pages 543-554]
  • Norouzi, Mahmood The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Norouzi, Mahmood Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Nourmohamdi, Hossein Chatter Suppression in turning by applying a tooling mechanism with the ability to change the tool angles [Volume 55, Issue 4, 2023, Pages 461-474]

P

  • Pirali, Pouya Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Pirbarjasteh, Mohammad Javad Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Pirkandi, Jamasb Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Pirmohammadi, Ali Akbar A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Pourhashem, Hamed Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Pourkamali anaraki, ali Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process [Volume 55, Issue 10, 2024, Pages 1219-1232]

R

  • Raei, Behrouz Experimental investigation of the effect of pH on the stability and thermal conductivity of metal oxide nanofluids [Volume 55, Issue 7, 2023, Pages 857-874]
  • Rafatnia, Sadra Design and Experimental Validation of an Extended State Observer for Estimating of Uncertainties and Unknown Road Input in a Quarter car McPherson Suspension System [Volume 55, Issue 12, 2024, Pages 6-6]
  • Ramezan Behtash, Hamidreza Kinetic modeling of CO2 capture in calcium looping process in the presence of sulfur dioxide based on random pore and fractal-like models [Volume 55, Issue 5, 2023, Pages 659-674]
  • Ranjbarkohan, Mohammad Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process [Volume 55, Issue 10, 2024, Pages 1219-1232]
  • Ranjbarnodeh, Eslam Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Rebiee, Alireza Improving aerodynamic and aeroacoustic performance of the propeller by synchronic wavy tubercles [Volume 55, Issue 9, 2023, Pages 1157-1172]
  • Rezvan Nejad, Farhad Heat Transfer of Nanofluids in Converging and Diverging Microchannels by Mixture Model [Volume 55, Issue 5, 2023, Pages 595-616]
  • Rohani Bastami, Abbas Three-dimensional micromechanical modelling of effective elastic properties of graphene nanoplatelet-reinforced polymer nanocomposite using a HFGMC-based homogenization approach [Volume 55, Issue 4, 2023, Pages 495-514]
  • Rostami, Javad Heat Transfer of Nanofluids in Converging and Diverging Microchannels by Mixture Model [Volume 55, Issue 5, 2023, Pages 595-616]
  • Rostami, Mohsen Numerical investigation of the influence of operating conditions on the performance of PEMFC powered Unmanned Aerial Vehicle (UAV): a statistical approach [Volume 55, Issue 3, 2023, Pages 407-430]
  • Rouzegar, Seyed Jafar State-space approach for bending analysis of functionally graded piezoelectric plate using five-variable refined plate theory [Volume 55, Issue 2, 2023, Pages 213-234]

S

  • Sabbaghi, Mohammad Ali Performance investigation of a novel trigeneration system using solar-biomass energy [Volume 55, Issue 9, 2023, Pages 1089-1112]
  • Sadeghi, Mohammad Hossein Numerical Simulation of the saline water electrolysis process using electromagnetic waves [Volume 55, Issue 11, 2024, Pages 4-4]
  • Sadri, Shirzad Determination of convective heat transfer coefficient in human femur bone drilling in the presence of normal saline and evaluation of effective parameters [Volume 55, Issue 5, 2023, Pages 557-576]
  • Sadrvaghefi, SeyyedAli Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Salahshoor, Esmaeil Leader Following and Multiple Obstacle Avoidance of Autonomous Vehicle with Steering-Wheel and Driving-Wheel Torques Using Path Planning and Model Predictive Control [Volume 55, Issue 12, 2024, Pages 4-4]
  • Salari, Mohammad Analysis of the semi-elliptical crack in the FGM spherical pressure vessels [Volume 55, Issue 6, 2023, Pages 705-722]
  • Salmanpour, Niloufar State-space approach for bending analysis of functionally graded piezoelectric plate using five-variable refined plate theory [Volume 55, Issue 2, 2023, Pages 213-234]
  • Sattarifar, Iraj A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses [Volume 55, Issue 4, 2023, Pages 543-554]
  • Sayehvand, Habib Numerical modeling of rock cutting with abrasive water jet in order to determine the optimal range of parameters affecting the depth and volume of cutting [Volume 55, Issue 8, 2023, Pages 971-994]
  • Sazgar, Amjad Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process [Volume 55, Issue 10, 2024, Pages 1219-1232]
  • Sefid, Mohammad Performance investigation of a novel trigeneration system using solar-biomass energy [Volume 55, Issue 9, 2023, Pages 1089-1112]
  • Shahbazi, Hamed Designing and building a dialogue mechanism suitable for RoboPuppet using deep learning [Volume 55, Issue 8, 2023, Pages 919-942]
  • Shahbazi, Hamed Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Shahmardan, Mohammad Mohsen Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Shakeri, Faezeh Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Shams, Mehrzad Experimental investigation on the geometrical characterization of the cone-jet mode of electrospray of ethanol-water mixtures with different concentrations by high-speed imaging [Volume 55, Issue 5, 2023, Pages 617-642]
  • Sharifi Dolatabadi, Davoud Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Shojaian, Afshin Numerical investigation of the influence of operating conditions on the performance of PEMFC powered Unmanned Aerial Vehicle (UAV): a statistical approach [Volume 55, Issue 3, 2023, Pages 407-430]
  • Soltani, Elham Pollutants Transfer Simulation Model Using Combination of Augmented Reality and Computational Fluid Dynamics Techniques on Cell Phone Platform [Volume 55, Issue 1, 2023, Pages 143-156]
  • Soltani, Masoumeh Buckling analysis of tapered laminated composite channel-section beam-columns subjected to combined axial load and end moment [Volume 55, Issue 4, 2023, Pages 515-542]
  • Soorgee, Mohammad Hossein Three-dimensional micromechanical modelling of effective elastic properties of graphene nanoplatelet-reinforced polymer nanocomposite using a HFGMC-based homogenization approach [Volume 55, Issue 4, 2023, Pages 495-514]

T

  • Taghavipour, Amir Introducing a novel strategy to manage lithium-ion cells in fast-charge discharge operations with Model predictive controller [Volume 55, Issue 6, 2023, Pages 677-704]
  • Taheri, Moein Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Tahmasbi, AmirReza Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Tahmasebpour, Maryam Kinetic modeling of CO2 capture in calcium looping process in the presence of sulfur dioxide based on random pore and fractal-like models [Volume 55, Issue 5, 2023, Pages 659-674]
  • Tajaddod, Hamid Numerical study of the spread of toxic and hot fire gases in a multi-storey residential complex with and without sprinkler fire extinguishing system [Volume 55, Issue 11, 2024, Pages 1-1]
  • Talezadehlari, Ali Investigating the effect of thermal cycles on the recovery of tensile strength in self-healing composites under impact loading [Volume 55, Issue 2, 2023, Pages 159-178]
  • Taraghi Osguei, Amin Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string [Volume 55, Issue 6, 2023, Pages 737-758]
  • Taran, Babak A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Tavari, Hojatollah Simulation and optimization of surface roughness and cutting force in dynamic ploughing process of single crystal copper using molecular dynamics method [Volume 55, Issue 12, 2024, Pages 3-3]
  • Tizfahm, Mohammadreza Kinetic modeling of CO2 capture in calcium looping process in the presence of sulfur dioxide based on random pore and fractal-like models [Volume 55, Issue 5, 2023, Pages 659-674]
  • Torabi, Farshad Introducing a novel strategy to manage lithium-ion cells in fast-charge discharge operations with Model predictive controller [Volume 55, Issue 6, 2023, Pages 677-704]
  • Torabi, Keivan Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]

V

  • Varedi-Koulaei, Seyyed Mojtaba A novel objective function for path generation synthesis of the four-bar mechanism with prescribed timing [Volume 55, Issue 12, 2024, Pages 1-1]

Y

  • Yaghoobi, Amirhossein Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]

Z

  • Zahed, Iman Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder [Volume 55, Issue 7, 2023, Pages 819-836]
  • Zamani, Mohammad Reza Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells [Volume 55, Issue 8, 2023, Pages 995-1008]
  • Zaminpayma, Esmaiel Investigating of the stability and structural, mechanical and electronic properties of two new superhard conductive carbon structures [Volume 55, Issue 10, 2024, Pages 1207-1218]
  • Zandaf, Alireza Numerical Simulation of the Dispersion of Human Sneeze Droplets In The Surrounding [Volume 55, Issue 1, 2023, Pages 85-104]
  • Zandaf, Alireza Numerical simulation of two consecutive human sneezing and examining the dispersion of the resulting droplets in the surroundings [Volume 55, Issue 7, 2023, Pages 875-894]
  • Zangeneh, AmirMohammad A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses [Volume 55, Issue 4, 2023, Pages 543-554]